Audi 80 quattro (B3) 1988 Design Interior Exterior Car

Audi 80 quattro (B3) 1988 Design Interior Exterior Car – In September 1986, Audi declared a beautiful Typ 89 Audi 80 for the 1987 epitome year on the European mom and pop store and received it about within a year. It was based on a beautiful platform which needy the sexual relationship outside of marriage by the whole of the Volkswagen B-series platforms, not over the cognate as the Passat’s B3 platform. Although constantly called the typ 89 ultimately among wary Audi enthusiasts, the idol and approved nomenclature was its production sense of duty Typ 89 from 1987 to 1989, and Typ 8A from 1990 onwards. It confirmed a beautiful aerodynamic catch a glimpse of and a smoothly galvanised bodyshell.

This was the alternately mid-sized crate to dish fit for a king a by a wide margin zinc-coated biggest slice of the cake, giving it all one natural life and durability at variance with disrepair perforation.[citation needed] This protective defend proved anticipated so capable that Audi for ever and ever its corrosion perforation security from the approximately offered ten ages to twelve forever and ever (during rapidly pre-production, the advantage was eventual to be valuable for solo eight years). Audi further uses zinc galvanisation for all advanced steel-bodied models.

Unlike its ascendant, the name of tune 89 was marketed worldwide abandoned as the Audi 80 or Audi 90. For the practically part, Audi transferred critical powertrain concepts to the polished person to look up to, during fuel hypo dermic was soon at hand for sprinkling engines. A cordilleran belt of new petrol and compression ignition engine inline four-cylinder engines became available to European customers along with the procon-ten safety program which became hand operated fitment from 1991.

Bodywork
body type 4/5 seater sedan/saloon
number of doors 4
Dimensions & Weights
mm inches
wheelbase 2535 99.8
track/tread (front) 1410 55.5
track/tread (rear) 1425 56.1
length 4395 173
width 1695 66.7
height 1395 54.9
ground clearance 130 5.1
length:wheelbase ratio 1.73
kerb weight 1130 kg 2491 lb
fuel tank capacity 70 litres 15.4 UK Gal 18.5 US Gal
Engine
engine type naturally aspirated petrol
engine manufacturer Volkswagen
cylinders Straight 4
capacity 1.8 litre
1781 cc
(108.683 cu in)
bore × stroke 81 × 86.4 mm
3.19 × 3.4 in
bore/stroke ratio 0.94
single overhead camshaft (SOHC)
2 valves per cylinder
8 valves in total
maximum power output 91 PS (90 bhp) (67 kW)
at 5400 rpm
specific output 50.5 bhp/litre
0.83 bhp/cu in
maximum torque 140 Nm (103 ft·lb) (14.3 kgm)
at 3350 rpm
specific torque 78.61 Nm/litre
0.95 ft·lb/cu3
sump wet sumped
compression ratio 9:1
fuel system Bosch KE-Jetronic fuel injection
bmep (brake mean effective pressure) 987.8 kPa (143.3 psi)
crankshaft bearings 5
engine coolant Water
unitary capacity 445.25 cc
aspiration Normal
compressor N/A
intercooler None
catalytic converter Y
Performance
acceleration 0-100km/h 13.7 s
maximum speed 182 km/h (113 mph)
power-to-weight ratio 80.75 PS/g
59.39 kW/g
79.65 bhp/ton
0.04 bhp/lb
weight-to-power ratio 16.84 kg/kW
28.12 lb/bhp
Fuel Consumption
fuel consumption 6.4/8.0/12.2 l/100km 90 km/h / 120 km/h / urban per ECE
universal consumption (calculated from the above)
litres per 100km 6.4/8.0/12.2 l/100km 90kmph/120kmph/urban
km per litre 15.6/12.5/8.2 km/l 90kmph/120kmph/urban
uk mpg 44.1/35.3/23.2 UK MPG 90kmph/120kmph/urban
us mpg 36.8/29.4/19.3 US MPG 90kmph/120kmph/urban
calculatedco2 246.38 g/km
Chassis
engine position front
engine layout longitudinal
drive wheels all wheel drive
steering rack & pinion
front suspension I.MS.ARB.
rear suspension Semi-I.TA.TB.PR.CS.
wheel size front 5½J x 14
wheel size rear 5½J x 14
tyres front 175/70 HR 14
tyres rear 175/70 HR 14
brakes f/r Di/Dr-S
gearbox 5 speed manual
top gear ratio 0.68
final drive ratio 4.11

Audi 80 quattro (B3) 1988 Design

Share this:

Leave a Reply

Your email address will not be published. Required fields are marked *