Exterior Design Big Truck Heavy Mover HM80570 Paul Concept 2012

Exterior Design Big Truck Heavy Mover HM80570 Paul Concept 2012 – Heavy Mover 80 570 I believe a lot of truck enthusiasts should have heard of this car, which is produced by Paul, Germany. Paul is a manufacturer specializing in the modification of the Mercedes-Benz truck chassis.

The two “Big Mac” dimensions are far more than conventional truck chassis: the overall length of close to 12.3m, height of more than 4, the width of 3.5m, and with Michelin specializes in special car design Single-Pneus series of giant Single tires, tires are very large, there is an adult so high. This model for the HM80 570 super heavy truck in front of the number 80 refers to the maximum allowable mass of the vehicle is 80t. Its traction pin can withstand 170t drag force, the vehicle’s maximum transport quality up to 250t.

The platform of the cab is very high from the ground, through the front bridge behind the 6 climbing ladder and wheel cover above the small platform can enter the cab. The cab passed the big cab of the previous generation Mercedes-Benz truck.

Exterior Design Big Truck Heavy Mover HM80570 Paul Concept 2012

HM 80570 equipped with a Mercedes-Benz truck 16-speed tiptronic transmission. Even in the case of full load, as long as the hanging 2 files, step on the throttle can be very easy to start. And steering wheel steering is also very easy, the car turned around when the steering wheel turns the number of turns is ordinary vehicles 2 times, although the number of laps, but it is easy to get started several times.

In terms of power, the car selected to meet the Euro three emission standards OM 502 LA engine, from the HM 80 570 name to know, its maximum power of 570PS, and the maximum torque up to 2400Nm.

Exterior Design Big Truck Heavy Mover HM80570 Paul Concept 2012

The unique feature of the car is the combination of off-road and load capacity of the “turbine clutch”, that is, we are familiar with Voith’s new hydraulic brake system (VIAB). The system integrates the functions of the clutch, torque converter and retarder into a system and is placed between the engine and the transmission.

Exterior Design Big Truck Heavy Mover HM80570 Paul Concept 2012

Share this:

Leave a Reply

Your email address will not be published. Required fields are marked *