BMW 3.0 CSi 1971 Sporty Exterior Interior Design

BMW 3.0 CSi 1971 Sporty Exterior Interior Design – The BMW 2800 CS was replaced by BMW 3.0 CS and BMW 3.0 CSi in 1971. The machine has been bored to provide 2.986 cc displacement (182.2 cu in), and is offered with 9.0: 1 compression ratio, twin carburetors and 180 horsepower (130 kW ) at 6000 revolutions per minute in 3.0 CS or 9.5: 1 compression ratio, Bosch D-Jetronic fuel injection, and 200 horsepower (150 kW) at 5500 revolutions per minute at 3.0 CSi. There is a 4 speed manual and an automatic transmission variant. The BMW 3.0 CSi with a two-door exterior design was built from 1971 to 1975. The 300-liter inject fuel fueled 300 horsepower, enough to push CSi down the road at 140 miles per hour. This simple overall exterior creates the BMW 3.0 CSi 1971 sedan looks sporty with a two-door style. For the interior of BMW 3.0 CSi 1971 with a simple cabin where the dashboard looks simple with a straight accented silver line, complete with a simple steering and analog panel neatly arranged. Foresight is quite visible area, the bottom position is quite free for the legs to rest. BMW 3.0 CSi 1971

Nissan Serena 2016 New Exterior Interior Design

Nissan Serena 2016 New Exterior Interior Design – The fifth-generation Nissan Serena is revealed in 2016 and comes with a new style designed with sharp lines, a more aggressive front end. The 2016 Serena 2016 exterior has a basic front fascia variant, Serena featuring a two-slat V-motion grille, which meets the carved bonnet. Two-level headlamps have also been installed here, neatly mounted next to grille and new hoods, along with new fog lights. Serena also gets a two-tone body color scheme and a “floating roof” view thanks to the D-painted black pillar. Nissan Serena 2016 also added that the A MPV pillar is thinner than before that does not result in a compromise on the structural rigidity of the vehicle. The protruding line also runs from the headlights, down the side of the MPV and into the rear door rail. On the back of the 2016 Serena Nissan with tail lights are now shorter than ever, so as not to confuse Serena’s “roofing” roof. Between redesigned tail lights is the blackened part of the rear hatch for the Nissan logo, and just below it is a large chrome accent placed just above the nameplate and plate plates. Nissan Serena 2016 gets a bodykit that consists of a more aggressive front bumper with additional chrome to make the V-motion grille more prominent. In the Interior section where the 2016 Serena Nissan cabin has been made more ……

Mercedes-Benz Series-NG Heavy-Duty Truck Design 1973-1988

Mercedes-Benz Series-NG Heavy-Duty Truck Design 1973-1988 – The generation of heavy-duty Mercedes-Benz trucks is a series of trucks made by Daimler-Benz from 1973 to 1988. The Mercedes-Benz Series-NG with Cabin is used by Mercedes-Benz which began offering with inline engines-six or five that have reliable power . In terms of the exterior of the Mercedes-Benz NG series is not too much difference, the prominent difference of the Mercedes-Benz NG series is the configuration of 4×2 to 8×8 which is used as needed for heavy load carrier. The first generation Mercedes-Benz Series-NG, which was introduced in 1973, is a redesign with a completely new look. First launched as a construction vehicle on the market and 1974 added to the trunk cabin extended 600 millimeters. In 1977 the Mercedes-Benz Series-NG had Cabin in three different versions, a short cabin, also called S-Cab, a medium-length cab (M-Cab) with a narrow rear-side window, and a long-range cabin, L-Cab with two Lounge chairs. In 1977, the cabin had a narrow fender and when the intermediate cabin was added, the fenders were wider in all three types. Also medium heavyweight vehicles taken starting from 1975 to Mercedes-Benz Series-NG this. All cabins can now be tilted and in 1979 a large-capacity Cabin was added. From 1980 the Mercedes-Benz Series-NG was offered with a new engine of 95 kW / 130 hp to 276 kW / 375 hp. From the outside is a ……