Shelby Mustang GT500 1967 Sport Design Sturdy Body

Shelby Mustang GT500 1967 Sport Design Sturdy Body – The automotive world in 1967 was brilliant for the Ford Mustang Shelby GT 500. This model abandoned the conventional design concept, choosing the most cutting-edge moment of style decision. The style of the Shelby Mustang GT500 1967 is shifted to a cab that visually extends the “hunchback” nose, rounded over the front plane of the car. Very unusual looks a pair of additional double lamps mounted on the grille. This car also has an additional small rear spoiler to increase the downforce of this dynamic car.

Shelby Mustang GT500 1967 is only available as a fastback, and has some changes compared to the regular Mustang. The front fascia is rebuilt, the fastback opera window is removed and gets the air intake. Rutiaraights borrowed from 1967 Ford Thunderbird. Shelby Mustang GT500 1967 also has many badges ‘Snake’ on the front fender, on the grille and in the interior.

Interior Shelby Mustang GT500 1967 replicates the original 1967 Mustang, there is a different gauge, another steering wheel with a Shelby Logo on it. The seats are just standard with improved pruning.

Shelby Mustang GT500 1967 is equipped with 6-cylinder engine with 3.2 liter displacement, develops 120 horsepower, and three units in 4.7 liter V-shaped 8-cylinder, capable of delivering 200 to 271 hp. Shelby Mustang GT500 1967 is equipped with 428 cubic inches (7.0L) V8 which produces about 350 HP. The car is equipped with 3-speed automatic transmission or 4-speed manual.

Body type 2+2 seater fixed-head coupé
Number of doors 2
mm inches
Wheelbase 2743 108
Track/tread (front) 1476 58.1
Track/tread (rear) 1476 58.1
Length 4745 186.8
Width 1801 70.9
Height 1316 51.8
length:wheelbase ratio 1.73
Kerb weight 1563 kg 3446 lb
fuel tank capacity 60.5 litres 13.3 UK Gal 16 US Gal
engine type naturally aspirated petrol
Engine manufacturer Ford
Cylinders V 8
Capacity 7 litre
6990 cc
(426.556 cu in)
Bore × Stroke 104.9 × 101.1 mm
4.13 × 3.98 in
Bore/stroke ratio 1.04
Valve gear overhead valve (OHV)
2 valves per cylinder
16 valves in total
maximum power output
431 PS (425 bhp) (317 kW)
at 5600 rpm
Specific output
60.8 bhp/litre
1 bhp/cu in
maximum torque
645 Nm (476 ft·lb) (65.8 kgm)
at 3400 rpm
Specific torque
92.27 Nm/litre
1.12 ft·lb/cu3
compression ratio 11.6:1
bmep (brake mean effective pressure) 1159.6 kPa (168.2 psi)
crankshaft bearings 5
Engine coolant Water
Unitary capacity 873.75 cc
Aspiration Normal
Compressor N/A
Intercooler None
Catalytic converter N
Power-to-weight ratio 275.69 PS/tonne (1000 kg)
202.77 kW/tonne (1000 kg)
271.91 bhp/tonne (1000 kg)
0.12 bhp/lb
Weight-to-power ratio 4.93 kg/kW
8.24 lb/bhp
Engine position front
Engine layout longitudinal
Drive wheels rear wheel drive
Torque split N/A
Front suspension I.CS.
Rear suspension LA.SE.
Brakes F/R Di/Dr
Gearbox 4 speed manual

Shelby Mustang GT500 1967

Share this:

Leave a Reply

Your email address will not be published. Required fields are marked *